Personal tools
You are here: Home gvSIG Projects gvSIG Desktop Documentation User documentation gvSIG-Desktop 1.9. User manual Manual de usuario gvSIG 1.9
gvSIG Desktop
gvSIG Desktop

Cached time 11/22/13 04:24:37 Clear cache and reload

 
Document Actions

Manual de usuario gvSIG 1.9

by Grupo gvSIG last modified 2011-04-19 16:42

Select the “Layer” option from the menu bar then go to “Export to…/postgis”.

../exportar-capa/exportar-capa-en.img/exportarPostGis_en.png

If you have selected any elements, a window will appear telling you how many elements are going to be exported (as in exporting to shp and dxf).

If you have selected any elements, a window will appear telling you how many elements are going to be exported (as in exporting to shp and dxf).

Remember that if the table already exists in the data base, the information it contains will be deleted.

../exportar-capa/exportar-capa-en.img/introducirNombreCapaPostGIS_en.png

Write the name of the table and click on “Ok”. A new window appears in which you will have to input the parameters of the data base connection.

../exportar-capa/exportar-capa-en.img/database_conection_en.png

he parameters are:

Name: Name of the connection.

Computer: IP address of the computer the data base is hosted in

Port: Port on which the computer is listening to the postgreSQL service.

User: User name recognised by the administrator to make the connection

Password: User password required to validate the connection. db: The data base the new table is to be created in.

Driver: Driver required for the data base. (At the time of going to press, drivers for postGIS and mySQL were available). When you have input the connection parameters, click on “Ok”.

Get freemind document

View source document Get permanent link


Powered by Plone CMS, the Open Source Content Management System

This site conforms to the following standards: